CBI All in one DC-UPS

This is a revolutionary line, designed to provide uninterruptible power whatever condition the system is in, by means of sophisticated and completely automatic management of any type of industrial battery. Easy to install, these are compact devices which perform three key functions: power supply, Back Up Module and Battery Charger. The UPS range is no more than an extension of the CBI range, designed to enhance some of its particular features, such as the RS 232 connection output, dual output voltage independent.

For a Powerpoint presentation on the full range of CBI DC-UPS CLICK HERE and for a catalogue CLICK HERE or view below for indvidual datasheets.

CBIs integrate power supply, back-up modules and battery charging functions. These devices are based on microcontroller switch-mode technology, which optimises the times for charging and discharging accumulators without discharging the battery completely. They switch the battery onto Load without any interruptions and automatically protect output against reverse polarity, short-circuiting, overload and overcharging without a fuse. They also diagnose the internal status of the battery using the Life Test function, enable the most appropriate recharging curve to maximum efficiency of the system to be selected and guarantee batteries a long life over time, whilst enhancing their performance. With two relays output, one for Main/BackUp one for battery monitoring, they comply with the most innovative standards for battery management as well as electrical safety. DIN Rail Mountable.

  • Output: 12, 24, 48Vdc, in case of fault in the mains
  • Output In: 2,5A ÷ 20A, in case of fault in the mains
  • Automatized repartition of the available power between the battery charge and re-charge functions, up to the double of the power value available at the charge output regarding to the input current
  • Visual signals for "Main no-voltage"; "Battery fault"; "Low battery signal - capacity less than 30%"; "Battery charge mode"; "Help through blinking code signal"
  • Signalling relay with voltage-free NO-NC output terminals for "Main or Back-up" and "Battery faulty/flat
  • 3 charging modes: "Boost"; "Trickle", "Recovery in case of completely flat battery"
  • Self-diagnostic function: "High voltage at battery ends"; "Open or sulphated battery"; "Inverted battery connection"; "Possible short-circuited element"; "protection against short-circuit"
  • Set to manage "Boost" and "Trickle" charge from remote control
  • Accessories on demand: external temperature probe for voltage compensation; voltage drop compensation; remote display LED panel
  • Ambient temperature operating field: -10 ÷ 50°C
  • IP20
Single-Phase Input 115 - 230 - 277 Vac - Output 12 or 24 Volts - Dual Voltage
CBI 2801224A 115-230-277 Vac 280 W DC-UPS - CBI Series
CBI 2801224B 230-400-500 Vac 280 W DC-UPS - CBI Series
Single-Phase Input 115 - 230Vac - Output 12Vdc
CBI 123A 115/230Vac  3A  DC-UPS - CBI Series
CBI 126A 115/230Vac  6A  DC-UPS - CBI Series
CBI 1210A 115/230Vac  10A  DC-UPS - CBI Series
CBI 1235A 115/230Vac 35A  DC-UPS - CBI Series
Single-Phase Input 115 - 230Vac - Output 24Vdc
CB I243A 115/230Vac  3A  DC-UPS - CBI Series
CBI 245A 115/230Vac  5A  DC-UPS - CBI Series
CBI 2410A 115/230Vac  10A  DC-UPS - CBI Series
CBI 2420A 115/230Vac 20A  DC-UPS - CBI Series
Single-Phase Input 115 - 230Vac - Output 48Vdc
CBI485A  115/230Vac 5A DC-UPS - CBI Series
CBI4810A 115/230 Vac  10 A  DC-UPS - CBI Series

DC UPS Comparison Table DC-UPS - CBI Series