Special AC Voltage Transducers

DIN rail mounting transducers available in 55mm x 112mm or 100 x 112mm DIN  rail cases.

Used to convert various inputs into standard DC signals for driving panel meters and for use in control devices.

M100-VS1 Suppressed zero voltage auxiliary powered
M100-VX1 1ph. aux. powered ave. sensing RMS calibrated
M100-VX3 3ph. aux powered ave. sensing RMS calibrated

The M100-VS1 is a self powered voltage transducer. The  suppression allows the transducer to accurately measure a voltage system over a narrow band either side of a nominal voltage. The range can be between ± 10% to ± 30% which can be specified when ordering. Typical application is to display the voltage on an analogue meter with an expanded scale.

This allows the user to read small changes in the voltage in a single or 3 phase system. The output could also be fed to a computer that could then control the voltage of the system, to ensure that it stays within the narrow band. The M100-VX1 and VX3 are essentially the same as the M100-VA1 and VA3, but they have auxiliaries which allow the working range to be 0-125% rather than 10-125%. Used where the average sensing of voltage is required from 0 to 125% of the nominal voltage.

Rated value Un: 57.8 < 100 / 110 < 600V
Power Consumption: < 1VA (VX1,VX3)< 1.5VA (VS1)
Working Range: 0-125%Un (VX1, VX3)<1.5VA(VS1)
Rated Frequency: 50 / 60 / 400Hz
Overload Continuous: 1.5 x Un
Overload for 1 sec: 2 x Un
Rated value mA: 0-1 / 5 / 10 / 20mA (VX1,VX3)
Rated value mA: 1 / 5 / 10 / 20 & 4-20mA (VS1)
Rated value volts: 0-5 / 10V (VX1,VX3)
Rated value volts: 0-5 / 10V & 1-5V (VS1)
Zero: No adjustment (VX1,VX3)
Zero: ± 2% (VS1)
Span: ± 10% (VX1,VX3,VS1)
A.C. Voltage : 115 / 230V / 400 (± 25% / 45-65Hz/<2VA)
D.C. Voltage: 24/48/110V(± 20% galvanically isolated /3W)
Note M100-VS1 is self powered
M100-VS1,VX1 Approx 0.4 kg. 55mm case
M100-VX3 Approx 0.7 kg. 100mm case
Product Code Input Un Output Aux Freq Options
M100-VS1 110V ± 15% 20mA - 50Hz


1 Non standard inputs / outputs where technically viable
2 A.C. Auxiliary in range 57.7 to 450 volts
3 Calibration at nominal Hz 35...450Hz
4 Calibration at temperature other than 23ºC