IPSi1200M Series

BENEFITS

Proven technology
Rugged and reliable for years of safe and trouble free operation
Multiple battery voltages supported by each model

The IPSi-M Series of 'Intelligent Pure Sinewave' Inverters are designed specifically for running computers and other sensitive AC loads in rugged mobile and other off-grid environments.

High current MIL connectors provide a solid connection to the battery. One high current bayonet style MIL connector is provided for AC connection out to the loads.

Models are available for 110 or 220 Volts AC Out at 50 or 60 Hz (user selectable), and to operate from 20-45 or 40-80 Volts DC In to cover all standard DC battery voltages from 24 to 64 volts nominal (includes 72V Rail).

Using the free to download 'Power Wizard' software, the user can select output frequency, output voltage and low voltage shutdown parameters from any laptop through the standard usb interface.

Features

Pure Sine Wave output – 110 VAC or 220 VAC at 50 or 60 Hz fully regulated output, exactly the same as household AC
GTC020-32-5S DC Input Connection
Amphenol 97-7-8648-5 AC Output Connections
Extra heavy input filtering to eliminate interference with other equipment sharing the same batteries. (Note: MIL461E NOT guaranteed due to extremely high DC currents)
Digital Signal Processor controlled
State-of-the art MosFet technology for efficient and reliable operation
Toroidal transformer type output to protect computers and other sensitive equipment from surges and spikes
ON-OFF switch illuminated by AC output for positive indication of proper operation
Thermostatically controlled fan
Programmable low voltage warning and shutdown to protect the batteries
Over voltage and over temperature warning and shutdown to protect the inverter
Current Limiting and Short circuit protection
Inrush Current Limiting during DC connection
Isolated input for positive or negative ground operation
Diagnostic LEDs and Audible Alarm

Electrical [Input]
Nominal (ip)	12 VDC	24, 28, 32 or 36 VDC	48 or 72 VDC
Actual (Vdc)	11-15	20-50	40-90
Input Amps (Max)	120	60	30

Electrical [Output]
Output Nominal (op)	110	220
Output Volts (AC)	110 ± 10 rms (user adjustable)	220 ± 20 rms (user adjustable)
Output Amps	10A (cont.) / 12A (peak)	5A (cont.) / 6A (peak)
Output Frequency	50.00 ± 0.01 Hz OR 60.00 ± 0.01 Hz
Output Distortion	< 2% at 1200 Watts into resistive load
Regulation (Line & Load)	< +/- 2.0%
Duty Cycle	Continuous 100% for 24 hours per day
Efficiency	> 90% @ Maximum Output

Environmental Specification
Operating Temp. Range	-40C° to +50°C @ maximum output
Humidity	0 - 95% Relative Humidity (non-condensing) with standard conformal coating
Audible Noise	34.5 dB @ 3 ft
Typical Service Life	>10 years (87,600 hours)
Isolation	Input-Output & Output Case 1500VDC & Input-Case 500VDC
Vibration	Designed to meet MIL-STD 810F for shock and vibration

Mechanical Specification
Length	13.4 in +/- 0.1 in / 33.9 cm +/- 0.3 cm
Width	9.4 in +/- 0.1 in / 23.8 cm +/- 0.3 cm including mounting flanges
Height	7.7 in +/- 0.1 in / 19.6 cm +/- 0.3 cm
Clearance	1 inch (2.5 cm) all around
Material	Marine Grade Aluminium
Finish	Black Anodize / Powder Epoxy Coat
Fastenings	All 18-8 Stainless Steel
Weight	30.0 lb / 13.6 kg
Connections	DC In – Amphenol GTC020-32-5S, 150 Amp, 300V Rating c/w Protective Cover AC Out – 2 x Amphenol 97-7-8648-5 NEMA 5-15 receptacle c/w Protective Cover Other connection options available by request
Warranty	Two years parts and labor